Clubs & Getting Involved

Why Join a Club?

Here at UWindsor, our engineering clubs are split into two categories: technical and non-technical.

Technical Clubs

Engineering is a competitive field, and while everything you learn in classes is important, real design projects are where you will truly get a taste of what it means to be an engineer. It is where you’ll learn how to fail, how to fix those failures, how to meet deadlines, and where you’ll apply the engineering concepts you’ll learn in class. They are also a great place to meet fellow engineering students who share your interests, whether you’re passionate about robotics, automotive design, aerospace, software, electronics, or something else entirely.
Y
ou might even find yourself working alongside students in the same discipline, learning from upper-year students who have been where you are now, and building friendships that last long after graduation.

The best part is that you get to put your work to the test in the real world. From technical demonstrations to design challenges and all the way to inter-university competitions where you’ll go to different cities or countries with your team, you will see your ideas come to life. After months of building, testing, and improving, you will find that it is deeply rewarding to watch your hard work pay off. And in the meantime, you’ll have built lifelong friendships, developed new skills, and had a whole lot of fun.

Non-Technical Clubs

While you might put your engineering knowledge to the test with technical clubs, non-technical clubs are just as important for different reasons. They offer you a chance to explore a world beyond just equations and deadlines, connecting you to any number of things: a cause you might support, a hobby you might have, a culture you might love, and any number of others.

You will have the chance to work on community projects, gain soft skills, network, work on social issues, go to conferences, support a cause, or just become a part of a community you love!

FORMULA SAE

As our oldest and largest club, FSAE designs and builds an electric, formula racing car (think F1, but electric). While the speed (naturally) may not match, they compete internationally with other Formula Electric clubs. The premier nationwide competition is in June 2027 in Michigan.

In joining FSAE, you will have the opportunity to work on electric motors, batteries, high voltage systems, low voltage systems, chassis, tractive batteries, aerodynamics, electronics, powertrains, manufacturing, and more!

For more information (and if you’re interested in joining!), email fsae@uwindsor.ca.

CONCRETE CANOE

This team designs and builds a canoe out of concrete. (Sounds insane, we know)

Then, they RACE IT. (Sounds insane. We know.)

The goal is to compete yearly at the Canadian National Concrete Canoe Competition (CNCCC). 

In joining Concrete Canoe, you will have the opportunity to learn concrete mix design, geometric hull design, and experiential learning through casting and testing concrete cylinders.

For more information (and if you’re interested in joining!), email concretecanoe@uwindsor.ca

ROCKETRY

This club designs, manufactures, tests, and launches an actual high-powered rocket at the IREC and at Launch Canada. Students can work on everything from the shape of their rocket to its electronics and propulsion.

What would you do?

Aerodynamics: Design fins and the rocket body to make it fly efficiently
Manufacturing: Build and assemble the actual rocket
Testing: Test components before putting the rocket on the launch pad
Propulsion: Learn how rocket motors generate thrust

For more information (and if you’re interested in joining!), email uwinrocket@uwindsor.ca!

AERO DESIGN

This club designs, builds, and flies an aircraft for an international engineering competition. Teams not only have to make the plane fly, but also optimize it to complete specific competition missions while dealing with weight, size, and payload limitations.

What you would do:

  • Aerodynamics: learn how wings generate lifts/how aircrafts move through the air
  • Avionics: learn how airborne electronics for aircraft are created
  • Manufacturing: turn designs into a real aircraft
  • Flight testing: actually fly the aircraft and measure results

For more information (and if you’re interested in joining!), email lanceraerodesign@uwindsor.ca!

BAJA SAE

This club designs and builds an off-road racing vehicle designed to survive rough terrain, jumps, mud, and whatever else the competition throws at it. Its a full, mechanical-focused engineering project where students take a vehicle from an idea to a race-ready machine.

What would you do?

  • Vehicle design: Learn CAD and how the different parts of a vehicle fits together
  • Suspension & steering: Design systems that keep the vehicle controllable over rough terrain.
  • Chassis: Help design and manufacture the vehicle’s structural frame
  • Testing: Drive and test the vehicle before competition

For more information (and if you’re interested in joining!), email bajasae@uwindsor.ca!

MARS ROVER

This club designs and builds a robotic rover capable of completing tasks inspired by Mars exploration projects. This team is made up of students working across multiple different fields of engineering and aims to compete in the Canadian International Rover Challenge (CIRC).

What you would do:

  • Drive, Chassis, and Mechanical Systems: build and design these systems, learning AutoCAD in the process
  • Power Architecture, PCB design, and Electrical Systems
  • Design robotic arm
  • Build, code, and test the rover
For more information (and if you’re interested in joining!), email engvpin@uwindsor.ca!

STEEL BRIDGE

This club designs and builds a real steel bridge, then assembles and tests it under competition conditions. It’s a great introduction to structural engineering, especially if you’re in civil, since you’re building a bridge, not just analyzing one.

What would you do?

  • Structural design: learn how forces move through a bridge
  • CAD: design and model structural components
  • Analysis: determine where the bridge needs more strength and where weight can be removed
  • Fabrication: cut, drill, weld, and prepare steel components
  • Assembly & testing: put the bridge together & test performance
For more information (and if you’re interested in joining!), email uwinsteelbridge@uwindsor.ca!

LANCER AUTONOMOUS ROBOTICS CLUB

This club specializes in the fields of ground, aquatic, and aerial robotics. It is particularly multidisciplinary, combining mechanical engineering, electrical systems, programming, controls, and computer vision.​

What would you do?​

  • Mechanical: design robotic mechanisms and structures in CAD.​
  • Electrical: Learn circuits, PCB sensors, and power systems​
  • Programming: Learn Python and C++, writing software for robots​
  • Controls: Learn how software tells motors and mechanisms what to do​
  • Simulation: Test robotic systems virtually before building them physically

    ​

For more information (or if you’re interested in joining!), email larc@uwindsor.ca!

 

NATIONAL SOCIETY OF BLACK ENGINEERS

The National Society of Black Engineers (NSBE) is focused on community, mentorship, professional development, and connecting students with the engineering industry.​

What would you do?

  • Networking: meet engineers, companies, alumni
  • Professional development: build your resume and interview skills
  • Mentorship: Learn from upper-year students and engineering professionals
  • Conferences: Participate in larger NSBE events and industry opportunities

For more information (or if you’re interested in joining!), email nsbe@uwindsor.ca

ENGINEERS WITHOUT BORDERS

Engineers Without Borders is a global community of engineers, students, and advocates working to address real-world challenges and create a more equitable and sustainable world. At EWB, engineering is used not just to build things, but to understand problems, work with communities, and create lasting change

What would you do?​​

  • Social impact: learn how engineering can be used to address complex problems like access to essential services, sustainability, and education​​
  • Community projects: work with communities and organizations to identify problems and develop solutions​​
  • Innovation & sustainability: explore how technology and engineering can contribute to areas like clean tech, sustainable agriculture, and healthcare.​​​

​For more information (or if you’re interested in joining!), contact ewb@uwindsor.ca!

UWIN B.E.A.T.S

The Biomedical Engineering Advancements through Technology and Science club (B.E.A.T.S. for short) is a club which has the main aim of inspiring, empowering, and connecting students with an interest in biomedical engineering. ​

They promote awareness and appreciation of this discipline within the University of Windsor community and offer a place for students to engage in activities and conversations that enhance their academic, professional, and personal development, specifically networking events, competitions, and collaborative events. ​

​Also our newest club! For more information (or if you’re interested in joining!), email uwinbeats@uwindsor.ca!

WOMEN IN ENGINEERING

Women in Engineering is a group of University of Windsor students aiming to encourage diversity and inclusion in the Faculty of Engineering. They host many fun events and provide a safe, inclusive space aimed towards promoting, supporting, and encouraging women’s excellence in the engineering profession.

The WIE club supports many initiatives, notably:

  • K12 OUTREACH/GO ENG GIRL, an initiative aimed towards encouraging younger students (grades 7-10) to take on STEM/Engineering!
  • Commemoration of victims of gender-based violence (for example, every December 6th there is a commemoration event for the victims of the Polytechnique tragedy)
  • Movie nights, craft/plant sessions, general meetings, and more!

For more information (and if you’re interested in joining!), contact wie@uwindsor.ca!

Scroll to Top